70" Kampf Foil Slitter/Separator: FS-125

UNCOILERS:
- OD: 24 - 90" / 610 - 2286 mm
- Spool Sizes (ID, OD, Length):
a. 23.75 x 26 x 72" (603 x 660 x 1829 mm)
b. 12.81 x 16 x 66" (325 x 406 x 1676 mm)
c. 12 x 16 x 27.5" (305 x 406 x 698.5 mm)

RECOILERS:
- Slit Widths: 0.6 - 46" / 15.8 - 1169 mm
- Max Cuts: 40 cuts plus edge trims
- OD: 18 - 72" / 457 - 1829 mm
- Spool ID: 6, 10, 12, 16" on fiber cores (152, 254, 304, 406 mm)

SLITTER:
- Knife Type: Scissor cut
- Edge Trim (Per side!): 0.5 - 2.0" / 12.7 - 50.8 mm
- Scrap chopper internal parts not included
- Slit Width Tolerance: 0.0039" (+/-) / 0.1 mm
- Jog Speed: 32.8 fpm / 10 mpm

- Acceleration/Deceleration: VO-V max in approx. 80 seconds

- Uncoiler Wind Tension: 12 - 650 N max

- Recoiler #1 Wind Tension: 318 - 6328 N / 25% taper tension at outer diam

- Recoiler #2 Wind Tension: 318 - 8438 N / 25% taper tension at outer diam

- Elongation Unit (Stretch) 1.5 - 3.0% with a target of 2.0%

- Power:
480 V / 3 phase / 60 Hz
Total supply = 700 KVA
Control voltage = 24 volts

- Air Continuous pressure = 5.5 bar / Consumption = +/- 24 Nm3/hr

- Water = 1.5 m3/hr flow (53 cu ft/hr)

- Main Machine

Drive side on right
Uncoiler= stepped expand heads
Stretcher stand
Two (2) slitter cassettes
Pusher plates on recoiler

- Drive / Control: Siemens drives, motors, & SPS, Siemens PLC w/ modem, software

- Winding Shafts:
6" / 152 mm = 2
10" / 254 mm = 2
12" / 305 mm = 2
16" / 406.4 mm = 2

- Uncoiler Coil Handling Fixed-saddle coil car / Core roller table / Core deposit unit / 2-coil stands (non-driven) for 66", 72", 76" spools / Empty spool roller table

- Recoiler Coil Handling Two (2) transport cars

- Edge Trim Scrap handling: Suction, chopper, transport, air separator, and diverter gate. Vacuum hose, Maintenance platform

Sold "as is" EXW off foundation, dry warehouse. Line dismantled June 2020.