Pro-Eco 60" Tension Leveling Line: TLL-211

Description

Manufacture
- Pro Eco

Material
- Low Carbon, Galvanized, Pre-painted Steel
- 50,000 PSI shear strength max.
- 20,000-40,000 PSI yield strength
- Elongation Capacity = 0 - 1% Min.

Strip Width
- 12 - 60" / 305 - 1524mm

Strip Thickness
- .010 - .048" / 0.254 - 1.22mm

Coil Size
- Weight = 30,000 lbs. / 13,608kg
- OD = 72" / 1829mm

Line Speed
- Variable to 500 FPM

Electrical Supply = 460 V/3 PH/60 HZ
Air Supply = 100 PSI
Line Direction = Right to Left

Equipment:
Entry Coil Car:
- Model FCC-30-72-36-60-18
- Above Floor Type
- 36" Wide "V" Cradle
- Approx. 18" Lift
- Self-Contained Hydraulics
- 5 HP AC Motor
- Pendant Control

Uncoiler:
- Model SMU-30-72-20/24-60
- Hydraulic Expansion
- 20" - 24" Coil I.D. Range
- 4 Segment Pumpkin Tooth Drum
- Powered Holddown Roll
- Sliding Base
- Hyd. Motor Powered Threading Drive
- Wichita Water Cooled Brake

Entry Feed Table: Model ET-.048-60

Pinch Rolls:
- Model PRSG-6-60
- 6" Dia. Driven Pinch Rolls
- Hydraulic Motor Driven

Entry Crop Shear:
- Model HDCS-.048-60
- Hydraulic Actuation

Entry Tension Bridle: Rebuilt by SMS in 2008
- Model BR-25-60-4
- 4 Rolls, 66" Face x 25" Diameter,
- Urethane Covered (85-90 Durometer)
- 8" Dia. Snubber Roll
- Pulse Generator Mounted on High Tension Roll
- 12,000 Lbs Tension Capacity
- Roll Drives:
Roll #1 - 25 HP DC, 1750 RPM
Roll #2 - 25 HP DC, 1750 RPM
Roll #3 - 50 HP DC, 1750 RPM
Roll #4 - 100 HP DC, 1750 RPM

Tension Leveler:
- Model TL-5-2-60-P-4 HI
- 5 Pre-flex Rolls, 2" Dia. x 66" Face
- 5" Dia. x 66" Face Back-up Rolls
- (2) - 6" Dia. x 66" Face Neutralizing Rolls, Rubber Covered
- Neutralizing Rolls are mounted at Exit Side of Leveler
- Adjustable thru AC Gearmotor Driven Screw jacks

Exit Tension Bridle: Rebuilt by SMS in 2008
- Model BR-25-60-4
- 4 Rolls, 66" Face x 25" Diameter,
- Urethane Covered (85-90 Durometer)
- 8" Dia. Snubber Roll
- Pulse Generator Mounted on High Tension Roll
- 12,000 Lbs Tension Capacity
- Roll Drives:
Roll #1 - 100 HP DC, 1750 RPM
Roll #2 - 50 HP DC, 1750 RPM
Roll #3 - 25 HP DC, 1750 RPM
Roll #4 - 25 HP DC, 1750 RPM

Driven Pinch Rolls:
- 12" Diameter Rolls
- 20 HP VFD Motor

Exit Crop Shear:
- Model HDCS-.048-60
- Hydraulic Actuation

Exit Pass Line Roll:
- Model PR-10-60
- 10" Dia. x 66" Face Roll
- Feed Table to Recoiler

Automatic Edge Control:
- Model TC-.048-60

Recoiler:
- 20" Dia. Drum
- Powered Clamp and Expansion
- Hydraulic Pushoff
- Sliding Base
- 100 HP DC Motor, 650/2000 RPM

Exit Coil Car:
- Model FCC-30-72-36-60-18
- Above Floor Type
- 36" Wide "V" Cradle
- Approx. 18" Lift
- Self-Contained Hydraulics
- 5 HP AC Motor
- Pendant Control

All Variable Frequency Drives and Motors were updated in 2018.
Spare Bridal Rolls and Feeder Rolls included.

Sold "as is, where is" EXW installed and running, USA.