FOR SALE: 60" x 7.00" x 24,000LB Cincinnati/Forte Slitting Line

Manufacture

- Cincinnati/Forte
- New - 1969
- Many upgrades

Material

- Cold rolled + Aluminum

Strip Width

- 60" max

Strip Thickness

- .010" - .119"

Coil Size

- Entry ID = 16 - 24"
- Exit ID = 16" / 20" & 24"
- OD = 60" max entry and exit
- Entry Weight = 24,000 lbs
- Exit Weight = 20,000 lbs

Max. Shear

- 45,000 PSI

Max. Yield

- 45,000 PSI

Line Direction

- Left to Right

Mode of Operation

- Driven

Line Speed

- 250 / 500 fpm (approx.)

Equipment

- Entry Turnstile:

Four (4) Arms x 25,000lbs/arm

Powered Rotation

Slotted for C-Hooks

- Entry Coil Car:

Mast Type

Floor Mounted

Powered Lift and Traverse

Self-Contained Hydraulics

Machine Mounted Controls

- Uncoiler:

Single Mandrel Type

Hydraulic Expansion

Holddown with Powered Snubber Roll

Wichita Water Cooled Brake

AC Feed up Drive

Slide Base

Paper Winder

- Outboard Support - A & B:

Powered Extension / Retraction

- Entry Unit:

Extending Blade Peeler

Manual Side Guides

Powered Entry Pinch Rolls (incomplete)

PVC Applicator

Idler Pinch Rolls for PVC Application

Rotary Crop Shear

- Stationary Slitter Base:

20 HP AC Leeson Feed up Motor, 1750 rpm

Renold Gear Reducer, 41.8/1 ratio

75 HP Baldor DC Motor, 1760 RPM, (New in 2001)

Powered Head Lock

- Two (2) Slitter Heads:

Injector Type

Powered Traverse

Powered Top Arbor Adjust

Powered Outboard Retraction

"Over the Arbor" design for slitting widths between 48-60"

Head #1 - 5" Diameter Arbors

Head #2 - 7" Diameter Arbors

- Pit Section:

Inspection Table

Powered Cross Over Table

- Tension Stand: Combination Drag and Roll Type

Strip Separator Arm

"Drag" Type with two (2) Cylinders

Two (2) 14" Diameter Tension Rolls

Two (2) Wichita Water Cooled Brakes

- Recoiler:

16" Dia. Drum

Hydraulic Pushoff

Hydraulic Expansion & Gripper

Overarm Separator Assembly

150 HP Baldor AC Motor, 1150/2000 RPM

Two (2) Speed Transmission, 2:1 and 1:1 ratios

Bolt-on Risers for 20" & 24"

- Exit Coil Car:

Mast Type

Floor Mounted

Powered Lift and Traverse

Self-Contained Hydraulics

Narrow Coil Retainers

Machine Mounted Controls

- Exit Turnstile:

Two (2) Arms x 20,000lbs/arm

Powered Rotation

Slotted for C-Hook

Powered Lift / Retract

- Two (2) Scrap Winders:

Hydraulically Powered

Manual Scrap Dump

Level Wind

- Electrical Controls:

Main Operators Control Console

Auxiliary Operators Control Console

75 HP DC Drive for Slitter Head (New in 2003)

150 HP DC Drive for Recoiler (New in 2001)

- Slitter Tooling:

Approx. Knife Count

80 - 0.250" x 5" ID

50 - 0.500" x 5" ID

59 - 0.250" x 7" ID (beveled)

47 - 0.250" x 7" ID (beveled)

58 - 0.250" x 7" ID

Rubbers / Spacers / Shims / Separator Tooling

- Hydraulics System
- Water Cooler
- Removed and in Storage

Sold "as is, where is" EXW off foundation, USA.