Heavy Gauge Cut-to-Length Line located in Europe and off foundation.
Manufacture - FIMI / new 1978 Strip Width - 800 - 2080 mm Strip Thickness - 1.5 - 13 (15) mm Reference Material - (tensile strength) 640 (420) N/mm² Plate Length - 12.000 mm max Coil OD - 2600 mm max Coil Weight - 35 mtons max Line Speed - 30 mpm The line consists of: · coil car underfloor · double-mandrel uncoiler - with hold-down arm - mandrel diameter (with segments) 610/760/850 mm - expansion range 570 - 610 mm - brake disc brake - drive three-phase current motor · coil opener/pinch-roll unit/leveler - telescopic table hydraulic - bending roll hydraulic - Pinch rolls = two (2), with 340 mm diam - Leveling rolls = three (3), with 180 mm diam - drive three-phase current motor · edge trimmer with scrap conveyor - Blade shaft = 230 mm diam - Blade diam = 450 mm - Height adjustment = electromechanical - cutting gap adjustment = 0 - 1.9 mm - Width adjustment = electromechanical · scrap cutter - Rotor diameter = 300 mm - Number of blades/rotors = 4 - Drive - edge trimmer/scrap cutter = DC motor · Leveler 1 - Work rolls = Eleven (11) at 130 mm diam - Height adjustment, top rolls = electromechanical - Tilt adjust, top rolls = electromechanical - Swivel adjust, top rolls = electromechanical - Bottom rolls adjustment (deflection) = hydraulic - No. of supports top/bottom 3/3 - Main drive = DC motor · Leveler 2 - Work rolls = Fifteen (15) at 67 mm diam - Height adjustment, top rolls = electromechanical - Tilt adjust, top rolls = electromechanical - Swivel adjust, top rolls = electromechanical - Bottom rolls adjustment (deflection) = hydraulic - No. of supports top/bottom 7/7 - Main drive = DC motor · Flying Shear - Design = horizontal - Cutting = eccentric/coupling - Cutting gap adjustment = horizontal movement servo drive - Cutting movement = three-phase current motor · Acceleration belt with scrap switch - Scrap switch = hydraulic - Scrap length = 4000 mm max - Scrap car = lateral removable · Pinch Roll Unit and Stacker - No. of pinch rolls = 2 - Drive = DC motor - Adjustment length stop = electromechanical - Adjustment side stop = electromechanical - Pusher = pneumatic - Stack weight = 3000 kg/m length max - Stack removal = lengthwise · Hydraulics = included